Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2007 >> Maxima V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair

BCM

REMOVAL AND INSTALLATION

Removal

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring the new BCM after installation. Refer to BCS-18, "Configuration". Testing and Inspection

1. Disconnect the negative battery cable.
2. Remove the lower driver instrument panel.




3. Remove the screws and release the BCM from the steering member.
4. Disconnect the harness connectors and remove the BCM.

Installation
Installation in the reverse order of removal.

NOTE:
- When replacing BCM, it must be configured. Refer to BCS-18, "Configuration". Testing and Inspection
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-151, "NVIS(NISSAN Vehicle Immobilizer System-NATS)". Vehicle Immobilizer System
pro multis · About Operation CHARM