Ignition Timing: Testing and Inspection
Idle Speed and Ignition Timing CheckIDLE SPEED
With CONSULT-II
Check idle speed in "DATA MONITOR" mode with CONSULT-II.
With GST
Check idle speed with GST.
IGNITION TIMING
Any of following two methods may be used.
Method A
1. Slide the harness protector off ignition coil No. 1 to clear the wires.
2. Attach timing light to the ignition coil No. 1 wires as shown in the figure.
3. Check ignition timing.
Method B
1. Remove No. 1 ignition coil.
2. Connect No. 1 ignition coil and spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.
3. Check ignition timing.