Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2007 >> Quest V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair

Removal and Installation of BCM

REMOVAL

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to BCS-19, "Configuration". Testing and Inspection

1. Disconnect negative battery cable.
2. Remove the parking brake pedal assembly. Refer to "PARKING BRAKE CONTROL".




3. Remove the BCM (1) by removing the screw (A) and disconnecting the harness connectors (2).
- <- : Front

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
- When replacing BCM, it must be configured. Refer to BCS-19, "Configuration". Testing and Inspection
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-203, "NVIS(NISSAN Vehicle Immobilizer System-NATS)". Vehicle Immobilizer System
- When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to WT-14, "ID Registration Procedure". ID Registration Procedure
pro multis · About Operation CHARM