Service Limits & General Specifications
CONNECTING ROD SIDE CLEARANCE
^ Measure the side clearance between the connecting rod and crankshaft with a feeler gauge.
Standard: 0.20 - 0.35 mm (0.0079 - 0.0138 in)
Limit: 0.40 mm (0.0157 in)
^ If beyond the limit, replace the connecting rod and measure again. If still beyond the limit, replace the crankshaft.
CONNECTING ROD BEND AND TORSION
Bend: Limit 0.15 mm (0.0059 in) per 100 mm (3.94 in) length
Torsion: Limit 0.30 mm (0.0118 in) per 100 mm (3.94 in) length
^ If it exceeds the limit, replace connecting rod assembly.
CONNECTING ROD