Cannot Be Changed to Manual Mode

Cannot Be Changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. Refer to CVT-54, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
Is any malfunction detected by self-diagnosis?
YES >> Check the malfunctioning system. Refer to CVT-54, "Display Items List". With Manufacturer's Scan Tool
NO >> GO TO 2.

2. CHECK MANUAL MODE SWITCH
Check the manual mode switch circuit. Refer to CVT-115, "DTC P0826 MANUAL MODE SWITCH CIRCUIT". P0826
OK or NG
OK >> GO TO 3.
NG >> Repair or replace damaged parts.

3. SYMPTOM CHECK
Check again. Refer to CVT-44, "Cruise Test". Cruise Test
OK or NG
OK >> INSPECTION END
NG >> GO TO 4.

4. CHECK TCM
1. Check TCM input/output signals. Refer to CVT-49, "TERMINALS AND REFERENCE VALUES FOR TCM". Pinout Values and Diagnostic Parameters
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.