Pinout Values and Diagnostic Parameters

ECM Harness Connector Terminal Layout:

ECM Harness Connector Terminal Layout

ECM Terminals and Reference Value




PREPARATION
ECM is located in the engine room passenger side behind battery.

ECM Inspection Table (Part 1):

ECM Inspection Table (Part 2):

ECM Inspection Table (Part 3):

ECM Inspection Table (Part 4):

ECM Inspection Table (Part 5):

ECM Inspection Table (Part 6):

ECM Inspection Table (Part 7):

ECM Inspection Table (Part 8):

ECM Inspection Table (Part 9):

ECM INSPECTION TABLE
Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.