Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2007 >> Titan 2WD V8-5.6L (VK56DE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair

BCM

REMOVAL AND INSTALLATION

Removal

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring new BCM after installation. Refer to BCS-19, "Configuration". Testing and Inspection

1. Disconnect battery negative cable.
2. Remove lower knee bolster.




3. Remove screw and release BCM.
4. Disconnect connectors and then remove BCM.

Installation
Install in the reverse order of removal.

NOTE:
- When replacing BCM, it must be configured. Refer to BCS-19, "Configuration". Testing and Inspection
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-128, "NVIS(NISSAN Vehicle Immobilizer System-NATS)". Vehicle Immobilizer System
- When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to WT-13, "ID Registration Procedure". ID Registration Procedure
pro multis · About Operation CHARM