Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2007 >> Versa L4-1.8L (MR18DE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

Park/Neutral Position (PNP) Switch

Exploded View AT-230:




Exploded View AT-246:





REMOVAL AND INSTALLATION

Removal
1. Disconnect the battery negative terminal.
2. Remove air duct (inlet).





3. Remove control cable (1) from manual shaft. Refer to Exploded View.
4. Disconnect PNP switch harness connector (2).
5. Remove PNP switch bolts.
6. Set manual shaft in "P" position.
7. Remove PNP switch from A/T.

Installation
Installation is in the reverse order of removal.

NOTE:
^ Align PNP switch position when installing.
^ After installation is completed, adjust and check the PNP switch and A/T position. Refer to AT-234, "Checking of A/T Position". Testing and Inspection
^ After installation is completed, check continuity of PNP switch. Refer to AT-191, "PNP SWITCH". PNP, OD Switch and Closed Throttle, Wide Open Throttle Position Signal Circuit




pro multis · About Operation CHARM