Component Function Check

SHIFT POSITION INDICATOR CIRCUIT


Component Function Check

1.CHECK SHIFT POSITION INDICATOR

CAUTION:
Always drive vehicle at a safe speed.
1. Start engine.
2. Check if correct selector lever position ("P", "N", "R" or "D") is displayed as selector lever is moved into each position.
3. Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when selector lever is shifted to the "UP (+ side)" or "DOWN (- side)" side
(1st from/to 6th gear).
Is the Inspection result normal?
YES >> Inspection END
NO >> Go to Diagnosis Procedure.