Component Function Check

VARIABLE INDUCTION AIR SYSTEM


Component Function Check

1. CHECK OVERALL FUNCTION-I
With CONSULT-III
1. Start engine and warm it up to the normal operating temperature.
2. Perform "VIAS S/V-1" in "ACTIVE TEST" mode with CONSULT-III.
3. Turn VIAS control solenoid valve 1 "ON" and "OFF", and check that power valve actuator 1 rod moves.






Without CONSULT-III
1. Start engine and warm it up to the normal operating temperature.
2. When revving engine up to 5,000 rpm quickly.
3. Check that power valve actuator 1 rod moves under the following conditions.










Is the inspection result normal?
YES - GO TO 2.
NO - Diagnosis Procedure.
2. CHECK OVERALL FUNCTION-II
With CONSULT-III
1. Perform "VIAS S/V-2" in "ACTIVE TEST" mode with CONSULT-III.
2. Turn VIAS control solenoid valve 2 "ON" and "OFF", and check that power valve actuator 2 rod moves.






Without CONSULT-III
1. When revving engine up to 5,000 rpm quickly.
2. Check that power valve actuator 2 rod moves under the following conditions.










Is the inspection result normal?
YES - INSPECTION END
NO - See Diagnosis Procedure.