Keyless Entry Receiver: Service and Repair
REMOTE KEYLESS ENTRY RECEIVER
Removal and Installation
REMOVAL
1. Remove the front pillar upper finisher (RH). Service and Repair.
2. Remove the side ventilator grille (RH). Exploded View.
3. Remove the upper glove box. Exploded View.
4. Remove cluster lid D. Exploded View.
5. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
INSTALLATION
Installation is in the reverse order of removal.
- Perform TPMS ID registration. ID Registration Procedure.