Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2011 >> Cube L4-1.8L (MR18DE) >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Programming and Relearning >> TCM Replacement >> Special Repair Requirement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Special Repair Requirement





INSPECTION AND ADJUSTMENT


TCM REPLACEMENT : Special Repair Requirement


CAUTION:
Immediately after TCM is replaced or after transaxle assembly is replaced (after TCM initialization is complete), self-diagnosis result of "P1701" may be displayed. In this case, erase self-diagnosis result using CONSULT-III. After erasing self-diagnosis result, perform DTC P1701 reproduction procedure and check that malfunction is not detected. P1701.
1.CHECK AFTER WORK
1. Shift selector lever to "P" position.
2. Turn ignition switch ON.
3. Check that "P" is displayed on shift position indicator on combination meter.

NOTE:
"P" is displayed approximately 1 to 2 seconds after tuning ignition switch ON.
Does shift position indicator display "P"?
YES - INSPECTION END
NO - Check the following.
- The harness between TCM and ROM ASSY in transaxle assembly is open or shorted.
- Terminals disconnected, loose, or bent from connector housing.
pro multis · About Operation CHARM