Reprogram the Meter

IMPORTANT:

^ Before starting, make sure your ASIST has been freshly synchronized and all C-III plus upgrades have been installed. The Meter reprogramming software is delivered via ASIST synchronization.

^ This reprogramming process requires an Internet connection. Make sure the CONSULT PC has an Internet connection (cable or WI-FI) before starting.

^ The CONSULT PC must have the ability to print the calibration report while cable- connected to the vehicle.

^ The software will not allow reprogramming of vehicles that are not affected by this campaign.

^ The reprogramming can only be applied one time to each affected vehicle. Vehicle identification is validated against data located on NNA's servers before reprogramming is allowed.