Removal And Installation
SPARK PLUG
Removal and Installation
WARNING:
Be sure the engine and ignition switch are off and that the parking brake is engaged securely.
CAUTION:
Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs.
REMOVAL
1.Remove the ignition coil.
2.Remove the spark plug using a suitable tool.
CAUTION:
Do not drop or shock it.
INSPECTION AFTER REMOVAL
- Do not use a wire brush for cleaning.
- If the spark plug tip is covered with carbon, spark plug cleaner may be used.
Cleaner air pressure : Less than 588 kPa (6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds
- Checking and adjusting spark plug gap is not required between change intervals.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not drop or shock the spark plug.
