Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Juke AWD L4-1.6L Turbo (MR16DDT) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Connecting Rod, Engine
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Connecting Rod, Engine




CONNECTING ROD








Tighten connecting rod cap bolt with the following procedure:

CAUTION:






Check that there is no gap in the thrust surface (A) of the joint between connecting rod (1) and connecting rod cap (2) and that these parts are in the correct position. And then, tighten the connecting rod cap bolts.

If the connecting rod cap bolts are reused, measure the outer diameter.

Apply new engine oil to the threads and seats of connecting rod cap bolts.

Tighten connecting rod cap bolts.






Completely loosen connecting rod cap bolts






Tighten connecting rod cap bolts.






Then turn all connecting rod cap bolts 60 degrees clockwise (angle tightening).

CAUTION:






Check and confirm the tightening angle by using an angle wrench [SST: KV-10112100 (BT-8653-A)] (A) or protractor.

Never judge by visual inspection without the tool.

After tightening connecting rod cap bolt, check that crankshaft rotates smoothly.
pro multis · About Operation CHARM