Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Juke FWD L4-1.6L Turbo (MR16DDT) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Receiver >> Testing and Inspection >> Without Intelligent Key System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Without Intelligent Key System




REMOTE KEYLESS ENTRY RECEIVER

Component Function Check


1. CHECK FUNCTION

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "KEYLESS " or "KEYLESS UNLOCK" in "DATA MONITOR" mode.
3.Check that the function operates normally according to the following conditions.





Is the inspection result normal?
YES- Remote keyless entry receiver is OK.
NO- .


Diagnosis Procedure


1. CHECK REMOTE KEYLESS ENTRY RECEIVER GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM connector and remote keyless entry receiver connector.
3.Check continuity between BCM harness connector and remote keyless entry receiver harness connector.





4.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness.

2. CHECK REMOTE KEYLESS ENTRY RECEIVER POWER SUPPLY

1.Reconnect BCM connector.
2.Check voltage between remote keyless entry receiver harness connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- GO TO 3.

3. CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 1

1.Disconnect BCM connector
2.Check continuity between BCM harness connector and remote keyless entry receiver harness connector.





3.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Service and Repair.
NO- Repair or replace harness.

4. CHECK REMOTE KEYLESS ENTRY RECEIVER OUTPUT SIGNAL

1.Reconnect remote keyless entry receiver connector.
2.Check signal between remote keyless entry receiver harness connector and ground using oscilloscope.





Is the inspection result normal?
YES- GO TO 5.
NO- Replace remote keyless entry receiver.

5. CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 2

1.Disconnect BCM connector and remote keyless entry receiver connector.
2.Check continuity between BCM harness connector and remote keyless entry receiver harness connector.





3.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Service and Repair.
NO- Repair or replace harness.
pro multis · About Operation CHARM