Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Maxima V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair >> Removal And Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal And Installation




ACCELERATOR CONTROL SYSTEM

Removal and Installation


REMOVAL

1.Disconnect the battery negative terminal. Removal And Installation.
2.Disconnect the accelerator position sensor electrical connector.
3.Remove the three accelerator pedal nuts.
4.Remove the accelerator pedal and accelerator position sensor assembly.
- For electrical inspection of the accelerator pedal position sensor. P2122.

CAUTION:
- Do not disassemble the pedal assembly. Do not remove the accelerator pedal position sensor from the pedal assembly.
- Avoid impact from dropping during handling.
- Keep the pedal assembly away from water.

INSTALLATION

Installation is in the reverse order of removal.
- Align and install accelerator pedal and accelerator position sensor assembly with locating pins in locating pin holes.
- Check the accelerator pedal for smooth operation. There should be no binding or sticking when applying or releasing the accelerator pedal.





- Check that the accelerator pedal moves through the full specified distance of pedal travel.
Pedal travel (A): [1][2]Accelerator Pedal.

CAUTION:
When the harness connector of the accelerator pedal position sensor is disconnected, perform the
"Accelerator pedal released position learning". Special Repair Requirement.
pro multis · About Operation CHARM