Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Quest V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Service and Repair >> Touch Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Touch Sensor




BACK DOOR LOCK

TOUCH SENSOR : Removal and Installation


CAUTION:
Take care not to bend touch sensor.

REMOVAL

1.Remove back door lower finisher. Back Door Lower Finisher.
2.Disconnect touch sensor harness connector.










3.Remove fixing clips and screws of touch sensor.
4.Pull harness of touch sensor out of back door and remove touch sensor.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:





- After installing touch sensor using fixing clips (A), tighten fixing screws in numerical order as shown in the figure.





- Check back door open/close operation after installation.
pro multis · About Operation CHARM