Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Quest V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Windows and Glass >> Windows >> Testing and Inspection >> Component Tests and General Diagnostics >> Encoder Circuit >> Driver Side >> Diagnosis Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnosis Procedure




ENCODER CIRCUIT

DRIVER SIDE : Diagnosis Procedure


1. CHECK ENCODER PULSE SIGNAL

1.Turn ignition switch ON.
2.Check signal between power window main switch harness connector and ground using an oscilloscope.










Is the inspection result normal?
YES- Replace power window main switch. Front Window Anti-Pinch.
NO- GO TO 2.

2. CHECK ENCODER SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector and front power window motor (driver side) connector.
3.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK ENCODER POWER SUPPLY

1.Connect power window main switch connector.
2.Turn ignition switch ON.
3.Check voltage between front power window motor (driver side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- GO TO 4.

4. CHECK ENCODER POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector.
3.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace power window main switch. Front Window Anti-Pinch.
NO- Repair or replace harness.

5. CHECK ENCODER GROUND CIRCUIT 1

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector.
3.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace harness.

6. CHECK ENCODER GROUND CIRCUIT 2

1.Connect power window main switch connector.
2.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace front power window motor (driver side). Removal And Installation.
NO- Replace power window main switch. Front Window Anti-Pinch.
pro multis · About Operation CHARM