Component Function Check With Manual Mode

SHIFT POSITION INDICATOR CIRCUIT

WITH MANUAL MODE : Component Function Check


1. CHECK SHIFT POSITION INDICATOR


CAUTION:
Always drive vehicle at a safe speed.
1.Start engine.
2.Check that correct selector lever position ("P", "N", "R" or "D") is displayed as selector lever is shifted into each position.
3.Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when the selector lever is shifted to the "UP (+ side)" or "DOWN (- side)"
side (1st <==> 6th gear).
Is the inspection result normal?
YES- INSPECTION END
NO- Go to Diagnosis Procedure With Manual Mode.