Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2013 >> Rogue 2WD L4-2.5L (QR25DE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Removal And Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal And Installation




IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL

1.Remove air duct (inlet). Refer to "Exploded View" Exploded View.
2.Remove battery. Refer to "Exploded View" Exploded View.





3.Remove IPDM E/R (1) while pushing and opening pawls (A).
4.Disconnect connectors from IPDM E/R.
5.Remove fuse and fusible link block cover.





6.Unlock all pawls (A) of IPDM E/R bracket, and remove IPDM E/R bracket (1).
7.Unlock pawls of IPDM E/R cover A, harness cover A and harness cover B, remove them.
8.Disconnect connectors connected to fuse and fusible link block upper side, and remove fuse and fusible link block.





9.Remove IPDM E/R cover B mounting bolts (A) and battery cable fixed clip (B), and remove IPDM E/R cover B (1).

INSTALLATION

Install in the reverse order of removal.
pro multis · About Operation CHARM