Installation

Fig. 3 IDI system coil and module assembly. 1988 Quad IV engine:

Fig. 4 IDI system assembly exploded view. 1988 Quad IV engine:

NOTICE:
- Reinstall boots and retainers on IDI housing secondary terminals.
- Boots and retainers must be in place on IDI housing secondary terminals prior to ignition system assembly installation or ignition system damage may result.

INSTALL OR CONNECT
1. Spark plug boots and retainers to housing.
2. ignition system assembly to engine while carefully aligning boots to spark plug terminals.
3. Ignition system assembly to cam housing bolts, after coating bolts with 1052080 or equivalent (4).
Torque to 26 N.m (19 lbs. ft.).
4. 11 pin IDI harness connector.
5. Negative battery cable.