Removal

Fig. 3 IDI system coil and module assembly. 1988 Quad IV engine:

Fig. 4 IDI system assembly exploded view. 1988 Quad IV engine:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. 11 pin ignition (IDI) harness connector.
3. Ignition system assembly to camshaft housing bolts (4).
4. Ignition system assembly from engine.

NOTICE:
- If boots adhere to spark plugs, use tool J-36011 to remove by first twisting and then pulling upward on retainers.
- Reinstall boots and retainers on IDI housing secondary terminals.
- Boots and retainers must be in place on IDI housing secondary terminals prior to ignition system assembly installation or ignition system damage may result.