Control Module HVAC: Service and Repair

Electronic Climate Control Programmer Location:

Electronic Climate Control Programmer Vacuum Harness:

Electronic Climate Control Programmer Internal Components:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. R.H. sound insulator.
3. Center I.P. trim plate.
4. Lower I.P. trim plate.
5. Wiring and hoses from programmer.
6. Programmer linkage cover and linkage.
7. Programmer and disconnect any wiring still attached to programmer.
8. Buffer assembly if equipped.

INSTALL OR CONNECT0R
1. Buffer to programmer if equipped.
2. Programmer and attach wiring and hoses.
3. Programmer linkage and linkage cover 4. Lower I.P. trim plate.
5. Center I.P. trim plate.
6. R.H. sound insulator.
7. Negative battery cable.