Lock Knob

LOCK KNOB

Door Lock Remote Control Handle & Escutcheon:

Rear Door Lock System Component Parts:

REMOVE OR DISCONNECT
1. Screws retaining remote control handle escutcheon to allow access to back side of locking rod knob.

NOTICE: Escutcheon cannot be removed prior to the removal of the locking rod knob.

2. Insert a small flat-bladed tool, such as a screwdriver, behind end of lock knob and pry to force it away from rod.
3. After end of rod is free from knob, slide knob rearward to remove from assembly.

INSTALL OR CONNECT
1. Position knob over locking rod and insert end of knob through hole in handle escutcheon.
2. Slide knob forward until end of rod goes into depression in end of knob.
3. Force knob against remote control escutcheon until rod snaps into knob.