Throttle Position Sensor: Service and Repair

Upper And Lower Manifold Assemblies:

Remove or Disconnect:

1. Electrical connector from TP sensor.

2. TP sensor attaching screw assemblies.

3. TP sensor.

NOTICE: The TP sensor is an electrical component. Do not soak in any liquid cleaner or solvent as damage may result.


Install or Connect:

1. With throttle valve closed, position the TP sensor on throttle shaft, then align the sensor mounting holes with the casting mounting screw holes.

2. TP sensor attaching screw assemblies coated with appropriate thread-locking material.


Tighten

3. TP sensor attaching screws to 2.0 N-m (18 ib. in.) Connect electrical connector on TP sensor.