Seats: Testing and Inspection

1. If Power Door Locks operate, PWR Seat Circuit Breaker is OK.

2. Check ground G401 by noting operation of LH Tail/Stop/Turn Lights.

3. Check motor linkage for poor connection or binding.

4. If the PWR ACCY Circuit Breaker opens whenever the Power Seat Switch is operated, check for a short to ground through CKTs 282, 283, 284, 285, 286 or 287.

Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (see "Diagnostic Aids").

Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (see "Diagnostic Aids").