External Components

EXTERNAL COMPONENTS

NP233 Transfer Case Components:

NP233 Transfer Case Components - Legend:

INSTALL OR CONNECT
1. Selection plunger (70), poppet spring (71), 0-ring seal (69), and poppet screw (68) into front case half (45).

TIGHTEN
^ Poppet screw to 15 Nm (11 lbs. ft.).

2. Speed sensor and 0-ring to the pump housing (8).

TIGHTEN
^ Sensor to 31 Nm (23 lbs. ft.).

3. Vacuum switch (46) and 0-ring (47) to the front case housing.

TIGHTEN
^ Switch to 24 Nm (17 lbs. ft.).

4. Encoder motor (94) and bolts (95).

TIGHTEN
^ Encoder motor bolts (95) to 18 Nm (13 lbs. ft.).

5. Front output yoke (74), rubber sealing washer (75), washer (76), and yoke nut (77).

TIGHTEN
^ Yoke nut (77) to 200 Nm (150 lbs. ft.).