Dimmer Switch: Service and Repair
Fig. 3 Ignition Switch Removal. Standard Column:
Fig. 4 Dimmer Switch Removal. Standard Column:
Fig. 5 Ignition & Dimmer Switch Removal. Tilt Column & Column W/SIR:
Fig. 6 Disconnecting Dimmer Switch From Bulkhead Connector:
Disable the Supplemental Inflatable Restraint (SIR) system as described in MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING prior to working on or near the steering column.
1. Remove turn signal switch as outlined under TURN SIGNAL SWITCH procedure.
2. Refer to Figs. 3 through 5, to remove ignition and dimmer switches.
3. Refer to Fig. 6 to disconnect dimmer switch from bulkhead connector.
4. When installing dimmer switch, depress switch slightly to install a 3/32 inch twist drill. Force switch upward to remove lash and tighten retaining screw.
5. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.