Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair

Throttle Body Assembly:

REMOVE OR DISCONNECT
1. Air inlet duct.
2. Sensor electrical connector.
3. Sensor attaching screws and retainers.
4. Sensor and 0-ring.

INSTALL OR CONNECT
1. With throttle valve in the normal closed idle position, install sensor and 0-ring on throttle body assembly.
2. Two sensor screws.

Tighten
^ Screws to 2.0 Nm (18 lb. in.).

3. Sensor electrical connector.
4. Air inlet duct.