Distributor: Service Precautions

1. When making compression checks, disconnect the distributor lead at the ignition coil. When disconnecting this connector, do not use a screwdriver or tool to release the locking tab, as it may break.

2. No periodic lubrication is required. Engine oil lubricates the lower bushing and an oil-filled reservoir provides lubrication for the upper bushing.

3. Dwell adjustment is controlled by the module, and cannot be adjusted.

4. The material used to construct the spark plug cables is very soft. This cable will withstand more heat and carry a higher voltage, but scuffing and cutting become easier.

The spark plug cables must be routed correctly to prevent chaffing or cutting. See Spark Plug, when removing a spark plug wire from a spark plug, twist the boot on the spark plug 1/2 turn and pull on the boot to remove the wire, or use a special tool designed to remove spark plug boots.