Window Regulator

Front Door Window Regulator:

Tool Required
J 34940 Rivet Gun

Remove or Disconnect

1. Trim panel.

2. Water deflectors from the door
^ Raise the window to the closed position and secure glass to the door frame using cloth-backed tape.
3. Rivets securing the regulator to the door inner panel (5).
4. Regulator lift arm roller from the window sash (3).
5. Regulator from the door.
6. Power window motor (if applicable).

Install or Connect

1. Power window motor (if applicable).
2. Regulator to the door.
3. Regulator lift arm roller to the window sash (3).
4. Rivets securing the regulator to the door inner panel (5) J 34940.
5. Water deflector.
6. Trim panel