Trim Panel

Front Door Trim Panel:

Tool Required:
J 38778 Trim Panel Remover

Remove or Disconnect

1. Door handle bezel.
2. Window regulator handle (if equipped).
3. Power accessory switch mounting panel (it equipped with power accessories).
4. Handle bezel screw.
^ Carefully pry off trim panel armrest screw cover with a flat blade tool to access screw.
5. Trim panel from the door.
^ Pry the retainers from their seats using J 38778.

Install or Connect

1. Trim panel to the door.
2. Window regulator handle (if equipped).
3. Power accessory switch mounting panel (if equipped with power accessories).
4. Handle bezel screw.

Tighten
^ Trim panel armrest screw to 5 N.m (44 lb in).

5. Door handle bezel.