Front Housing Disassembly

^ Tools Required:
- J 36183 Input Shaft Press Tube with Cap
- J 36184 Adapter Press Tube Reducer
- J 23907 Slide Hammer with Pilot Bearing Puller
- J 36507 Detent Bushing Remover and Installer
- J 36800 Shift Rail Bushing Remover

DISASSEMBLE
1. Press out input shaft bearing using J 36183, and J 36184 and hydraulic press.





2. Shift rail front housing bushing using J 36800 and J 23907.





3. Two detent plunger bushings, if necessary, using J 36507.
- Remove ONE bushing at a time.
4. Breather assembly.
- Do NOT remove metal tube from case.
5. Gasket material from the case using liquid gasket remover.