Memory Seats and Mirrors

Each transmitter can be programmed to allow memory seat and mirrors to activate:
^ Memory Position #1
^ Memory Position #2
^ Exit Position
^ Turn Off Feature

To program the system perform the following steps:
1. Set the seat and mirrors to a comfortable position.
2. Press the "SET" button on the memory seat controls. You will hear a single beep.
3. Press the desired position within 5 seconds (position #1, #2, or exit) (you will hear a single beep).
4. Press the UNLOCK button on the appropriate transmitter within 5 seconds (you will hear two beeps).
^ To turn off the feature skip step 3.

Once a transmitter has been programmed to the selected positions, any changes to those positions will require updating the seat function (steps 2 and 3).