Shift Control Cable - Floor Shift

REMOVE OR DISCONNECT
1. Cable from transaxle manual shaft lever and bracket on transaxle.
2. Shift handle.
3. Console trim, storage box, courtesy light and console as necessary.
4. Cable retaining clips and cable at console.
5. Left sound insulator.
6. Pull carpet back to expose cable.
7. Cable assembly through hole in cowl.

INSTALL OR CONNECT
1. Properly route and position cable.
2. Carpet into position, and left sound insulator.
3. Cable at console and retaining clips.
4. Console, courtesy light, storage box and console trim, as removed.
5. Shift handle.
6. Cable at transaxle lever and bracket.
7. Adjust cable as previously described.