Fuel Tank Pressure Sensor: Service and Repair

Fuel Tank Pressure Sensor:

Removal Procedure

Notice: Numbers in text correspond to numbered components in image.

1. Disconnect the negative battery cable.

2. Relieve the system fuel pressure. Refer to Fuel Pressure Release.

3. Drain fuel tank. Refer to Fuel Tank Draining.

4. Remove the fuel tank. Refer to Fuel Tank Assembly.

5. Remove the electrical connector from the fuel tank pressure sensor.

6. Remove the fuel tank pressure sensor (1) from modular fuel sender.

Installation Procedure

1. Install the new fuel tank pressure sensor (1) to modular fuel sender.

2. Install the electrical connector to fuel tank pressure sensor.

3. Install the fuel tank.

4. Refill tank.

5. Install the negative battery cable.