The Set Function

In order to set the cruise speed, perform the following steps:
The vehicle speed will be set at the particular speed of the vehicle when the switch is released.
1. Depress and then release the SET switch.
Vehicle speed must be above the low speed lockout point.
2. Turn the OFF-ON-R/A switch to the ON position.

Cruise speed will be within approximately 1.6 km/h (1 mph) of the actual speed when engaged.

The cruise control will operate until one of the following procedures are performed:
^ The On-Off-R/A switch is moved to the OFF position.
^ The SET switch is depressed and held.

Push the brake or clutch pedal in order to disengage the system.

The set speed is maintained in memory, allowing the cruise speed to be resumed at a later time.