Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1998 >> Bravada V6-4.3L VIN W >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair

REMOVAL PROCEDURE





1. Disconnect the battery negative cable.

CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.

2. Disconnect the electrical connector from the stoplamp switch.





3. Remove the pushrod retainer from the brake pedal pin.





4. Remove the stoplamp switch. Unsnap the switch from the pushrod.

INSTALLATION PROCEDURE





1. Install the stoplamp switch on the pushrod. The switch will snap in place.





2. Install the pushrod retainer on the brake pedal pin.





3. Install the electrical connector on the stoplamp switch.
4. Connect the battery negative cable.
pro multis · About Operation CHARM