Removal Procedure

1. Disable the SIR system. Refer to Disabling the SIR System. Disabling the SIR System
2. Remove oft road skid plate if equipped.
3. Remove the Connector Position Assurance (CPA) from the inflatable restraint front end discriminating sensor harness connector.
4. Disconnect the inflatable restraint front end discriminating sensor harness connector from the sensor.
5. Drill out the mounting rivets.
6. Remove the inflatable restraint front end discriminating sensor from the vehicle.

Important: The following procedures should be utilized in the event that sensor mounting holes or fasteners are damaged to the extent that the sensor can no longer be properly mounted.