Timing Chain and Sprockets Installation

^ Tools Required
- J36660 Torque Angle Meter





1. Install the timing chain on the sprockets. Align the timing marks.





2. Install the timing chain, the crankshaft sprocket, and the camshaft sprocket.
3. Install the camshaft sprocket bolt.

NOTICE: Refer to Permanently Stretching Bolt Notice in Service Precautions.

^ Tighten the camshaft sprocket bolt to 100 Nm (74 ft. lbs.). Use J36660 to tighten the camshaft sprocket bolt an additional 90 degrees.

NOTICE: Refer to Fastener Notice in Service Precautions.





4. Install the timing chain dampener.