Set Position

When you depress and then release the switch, the cruise speed will be set at the particular speed the vehicle was at when the switch was released. Ensure that the vehicle speed exceeds the low speed lockout point. Ensure that the OFF/ON switch is in the ON position. The vehicle cruise speed will be within 0.62 km/h (1 mph) of the actual speed when you engage the switch, and after the speed has stabilized. You may not set the cruise with the RESUME button.

The system will cruise until any one of the following actions occurs:
^ The OFF/ON switch is depressed.
^ The ignition switch is turned off.
^ The SET/COAST switch is pushed in and held.