Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1999 >> Aurora V8-4.0L VIN C >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL PROCEDURE

NOTICE: To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.





1. Remove the EBCM/EBTCM connector by rotating the locking clip forward.
2. Remove the mounting nuts.
3. Remove the EBCM/EBTCM by sliding it up and away from the strut tower.

INSTALLATION PROCEDURE





1. Install the EBCM/EBTCM into the lower locating slot. Slide the EBCM/EBTCM downward.

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the mounting nuts.
^ Tighten the nuts to 11 Nm (96 inch lbs.).

3. Connect the EBCM/EBTCM connector.
pro multis · About Operation CHARM