Traction Control Switch Replacement

REMOVAL PROCEDURE





1. Remove the shifter handle retaining clip.
2. Partially remove the shifter handle to allow access to the electrical connector (1).
2.1. Disconnect the electrical connector (1).
2.2. Remove the shifter handle.
3. Remove the traction control switch from the shifter handle.

INSTALLATION PROCEDURE





1. Install the traction control switch to the shifter handle.
2. Partially install the shifter handle.
2.1. Connect the electrical connector (1).
2.2. Install the shifter handle.
3. Install the shifter handle retaining clip.