Engine Mechanical Specifications-Unit Repair
| Cylinder Block | Material | Aluminum with Cast-in Grey Iron sleeves | |
| Bore | 3.424 - 3.425 inch @ 1.61 inch from deck surface | ||
| Stroke | 3.31 inch | ||
| Deck Height | 8.84 | ||
| Deck Clearance | 0.18 inch above deck surface | ||
| Length | 20.81 inch | ||
| Piston Clearance | 0.0008 - 0.002 inch | ||
| Deck Face Flatness -Maximum Allowed | 0.004 inch | ||
| Cylinder Bore Out-of-Round - Maximum Allowed | 0.004 | ||
| Cylinder Bore Taper - Maximum Allowed | 0.004 | ||
| Cylinder Bore Out-of-Round | New | 0.0004 | |
| Maximum Allowed | 0.004 | ||
| Cylinder Bore Taper | New | 0.0004 | |
| Maximum Allowed | 0.004 |