Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly: Service and Repair

Control Assembly Replacement


REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the accessory trim plate.
3. Remove the heater and A/C control (1) away from the instrument panel.
4. Disconnect the electrical connections.




5. Disconnect the vacuum hoses at the rear of the vacuum switch.

INSTALLATION PROCEDURE




1. Connect the electrical connections.
2. Connect the vacuum hoses.




3. Install the heater and A/C control (1) to the instrument panel (2).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the heater and A/C control retaining screws.

Tighten
Tighten the A/C control retaining screws to 2 N.m (18 lb in).

5. Install the accessory trim plate.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

6. Connect the negative cable.

Tighten
Tighten the negative battery cable bolt to 16 N.m (12 lb ft).