Cylinder Bore Data/Specifications
| Cylinder Block Material | Aluminum with Gray Iron Cast-In | |
| Bore Spacing Centerline to Centerline | 4.016 Inch (in) | |
| Cylinder Bore Taper | New | 0.0004 Inch (in) |
| Maximum Allowed | 0.004 Inch (in) | |
| Cylinder Bore Out-of-Round | New | 0.0004 Inch (in) |
| Maximum Allowed | 0.004 Inch (in) | |
| Deck Face Flatness - Maximum (no resurfacing allowed) | 0.004 Inch (in) | |
| Deck Height | 8.976 Inch (in) | |
| Coolant Drain Plug | Engine Block | 124 Inch Pound-Force (in.lb) |
| Front Cover | 89 Inch Pound-Force (in.lb) | |
| Oil Gallery Plug | Cylinder Head | 41 Foot Pound-Force (ft.lb) |
| Lower Crankcase | 48 Foot Pound-Force (ft.lb) | |
| Knock Sensor | 11 Foot Pound-Force (ft.lb) |