Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1999 >> Intrigue V6-3.8L VIN K >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Engine - Coolant Temperature Sensor/Switch >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Temperature Sensor/Switch (For Computer): Service and Repair






ECT SENSOR REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT: Care must be taken when handling the engine coolant temperature (ECT) sensor. Damage to the ECT sensor affects proper operation of the fuel injection system.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Drain the radiator coolant.
3. Disconnect the ECT sensor electrical connector.
4. Use a 19 mm deep well socket and an extension in order to remove the ECT sensor.

INSTALLATION PROCEDURE

IMPORTANT: Care must be taken when handling engine coolant temperature (ECT) sensor. Damage to the ECT sensor affects proper operation of the fuel injection system.

NOTE: Refer to Fastener Notice in Service Precautions.

1. Hand start the ECT sensor into the engine.

Tighten
Tighten the ECT sensor to 30 N.m (22 lb ft).

2. Connect the ECT electrical connector.
3. Refill the radiator with coolant.
4. Connect the negative battery cable.
5. Start the engine and inspect for leaks.
6. Inspect the coolant level.
pro multis · About Operation CHARM