Power Sunroof Express Module Replacement

REMOVAL PROCEDURE



1. Position the sun root in the fully closed position.
2. Remove the headliner.
3. Remove the express module from the sunroof module by sidling the express module towards the center of the vehicle.




4. Remove the electrical connectors from both ends of the express module.
5. Remove the express module from the sunroof.

INSTALLATION PROCEDURE



1. Position the express module to the sunroof module.
2. Install the electrical connector to the express module.




3. Install the express module to the sunroof module by sliding the express module to the right, pressing into place until fully locked in position.
4. Connect the electrical connectors to the express module.
5. Install the headliner.
6. Check the operation of the sunroof.