Cruise Release Switch Adjustment

1. Press the brake pedal assembly.
2. Insert the following components into the retainers until fully seated against the brake pedal bracket:
^ The release switch assembly (1)
^ The stoplamp switch assembly (2)
3. Twist the switch in order to lock into the desired position.
4. In order to ensure a properly adjusted release switch assembly and a properly adjusted stoplamp switch assembly, use the following brake pedal assembly travel distances:
^ The release switch assembly and the stoplamp switch assembly contacts must be open at a brake pedal travel range of 3.5-12.5 mm (0.125-0.5 in).
The brake pedal assembly travel is measured at the centerline of the brake pedal assembly pad.
^ The nominal actuation of the stoplamp switch assembly contacts is about 4.5 mm (0.188 in) after the cruise control switch assembly contacts close.